How Boxing Gloves Are Made


Gloves Boxing Boxer Sport Exercise Fitness

There are a few things that one needs to know to answer the question of how boxing gloves are made. When the use of boxing gloves was first introduced, its main use was to protect the ankles of combatants. In recent years, however, the requirements for padded gloves for boxing have gone high.

The gloves utilized in the leagues today for boxing are 10 ounces. The original function of protecting the combatant’s ankles remains, but now the additional padding is used for another reason: to protect the opponent from a slight knockout. The extra padding forces boxers to use an additional strategy instead of pure brute force.

Who invented boxing gloves?

Jack Broughton was the first British boxing champion – the first icon referenced in the history of British boxing in the early 18th century. He is considered by many to be the inventor of modern boxing gloves, not to mention that during his time as a boxing pioneer (the development of boxing gloves and equipment developed slowly after padding), the main public fights were still combatants without gloves. Bare ankles, everyone is out.

Based on the number of casualties and deaths in these games, a decision was made and boxing fans and communities began to apply the rules: In 1866, the fight for punches ended, and boxing gloves were put when boxing. There were a lot of fans who didn’t like the idea and we’re still excited about the rough fights.

What are boxing gloves filled with?

If you want to know how boxing gloves are made, you need to know the materials that are used as fillers. In ancient times, cotton was used as a filler. Some factories still use it to decorate part of their models.

Some use horsehair. Horsehair has been used extensively in the past, and some major brands still use it, but it’s no longer a fad in the modern boxing arena.

Most boxing gloves are already padded with a combination of layered foam or injection molded foam.

These foam layers allow different densities in different areas of the glove.

The brands on the market have their unique combination of padding, which takes the form of their gloves partly from leather and partly with the right layering method.

The IWF is shaped so that the shape of the boxing glove is preserved naturally.

How are boxing gloves made?

So you want to know how the production process of boxing gloves works. Below, you will find a video for the process of handmade boxing gloves. This will give you a general idea. We’ve also put the general sewing process in writing below the video. 

Below is the general sewing process:

  • The leather shell of the boxing glove is sewn from the inside out.
  • An industrial sewing machine is often used, while the smallest parts and surfaces are made by hand.
  • Some of the highest quality gloves are 100% handmade and double stitched.
  • The oversized joint piece is sewn onto the palm.
  • These two fit into a male to ensure that the shape is correct and the seam is assembled so that the portion of the joint swells slightly.
  • By picking up the seam, the glove can also take the form of a closed fist.
  • The lining pieces are then sewn into the assembled area.
  • The palm is then padded. The lining remains open at the right bottom side for the cuffs.
  • In some models, the rear half piece of a thumb is cut off as a portion of the joint piece.
  • Then the inside half undergoes sewing onto the palm and ankles.
  • There are also some models where the thumb is sewn separately: the lining is attached, and the padding is padded.
  • The thumb piece gathered is sewn to make a boxing glove.
  • Your cuff is the final piece that is sewn into the glove.
  • It is sewn with a lining and quilted afterward.
  • The ends are not sewn together as the part is a portion of the closing section of the glove.
  • The set is sewn onto the open end of the glove piece to close the open pockets and close the glove padding finally.
  • When the glove is closed with the drawstring closed, a model is worn and inserted into the opening at the lower side of the glove through the palm grove and the open ends of the wrist.
  • The tip holes are drilled with an awl.
  • Each hole is enriched with additional seams. All tips are polished with several seams.
  • If Velcro materials are to be used to close the glove, the loop side is sewn onto the outside of the flap.
  • The hook point, however, is sewn on the opposite edge of the cuff.
  • A thin leather band is folded over the open edge of the wrist, and the lace area is sewn to complete the pattern.
  • The manufacturer’s label or any other required label for the sanctioning body is sewn onto the back of the bracelet.

The glove is ready for packaging and shipping!

Recent Posts